• Grootste assortiment
  • Gratis verzending vanaf €50
  • Voor 16.00 besteld, vandaag verzonden!

Beoordeeld met een 8.6/10

BO.NAIL Soakable Gelpolish #083 Imperial (7ml)

BO.NAIL SYSTEMS BO.NAIL Soakable Gelpolish #083 Imperial (7ml)

€5,80 €7,25

Product description
  • Article code: 1212077172

Product description

Soakable Gelpolish is as durable as gel and as easy to apply as nail polish. BO. Soakable Gelpolish allows you to have gorgeous nails for up to 4 weeks. BO. Soakable Gelpolish is easy to apply, without chipping, peeling or wearing. It cures in 2 minutes in a UV Light or in just 30 seconds in LED Light. It's easy to remove - simply soak it off in just 10 minutes.

Features & Benefits

  • Ideal for natural and artificial nails (gels and acrylics)
  • Also ideal for toe nails
  • Easy application - applies like a polish
  • Delightful long lasting semi-permanent colors
  • Lasts beautifully for up to 4 weeks
  • Permanently shiny and non-yellowing
  • The perfect addition to any Gelpolish section
  • Color does not fade, dull, wear or chip
  • No damage to natural nails
  • No odor
  • Great for mixing and customizing colors
  • Use instead of nail polish
  • No waiting for polish to dry
  • Curing: 120 sec. UV / 30 sec. LED
  • Easy to remove in 10 minutes in combination with BO. Soakable Gel Remover and a Nail Foil or with BO. Gelbreaker

Usage

Step 1: Prepare the natural nail as usual and apply BO. Natural Nail Sanitizer onto the natural nail plate. Allow to fully dry before applying BO. Soakable Base Gel.

Step 2: BO. Soakable Base Gel - Wipe the brush off on the bottle neck to remove excess product. Cap the free edge of the nail to ensure durability and prevent shrinkage of the product. Holding the brush horizontal to the nail, apply a thin layer of BO. Soakable Base Gel over the entire nail from cuticle area to free edge. Cure all four fingers together for 120 sec. UV / 30 sec. LED. Repeat the process on the other hand then on the thumbs. Optional: brush with a clean gel brush to remove excess tacky cured base gel to decrease the chance of shrinkage and to get a smoother color application.

Step 3: BO. Soakable Gelpolish Color - Roll the bottle upside down between the palms of your hands to ensure that the color is thoroughly mixed. Cap the free edge with BO. Soakable Gelpolish to ensure durability and prevent shrinkage of the color. Holding the brush horizontal to the nail continue to the center of the nail. Move the brush from the center of the nail up towards the proximal nail fold and then stroke it down towards the free edge. Ensure to keep polish off the skin. If polish has touched the skin remove prior to curing the nail by using BO. Gel Cleanser and a Cuticle Pusher. Cure all four nails for 120 sec. UV / 30 sec. LED. Repeat the process on the other hand and thumbs

Step 4: BO. Soakable Gelpolish Color - Apply a second thin coat of polish using the same process. This coat provides full coverage. NOTE: if using a highly pigmented shade or a different lamp, it may be necessary to cure a second time to ensure that it is completely cured and that no color bleeds into your Top Gel application.

Step 5: BO. Soakable Top Gel - Wipe the brush off on the bottle neck to remove excess product. Cap the free edge of the nail to ensure durability and prevent shrinkage of the product. Holding the brush horizontal to the nail, apply a thin layer of BO. Soakable Top Gel to each nail surface of all four nails on one hand. Cure all four nails for 120 sec. UV / 30 sec. LED. Repeat on the other hand and finish with thumb application.

Step 6: If using BO. Soakable Top Gel or BO. Soakable Matte Top Gel it will be necessary to cleanse after curing. Saturate a gel sponge with BO. Gel Cleanser. With light pressure wipe away the top gel film, (this is the sticky inhibition layer). CAUTION: Do not re-wipe the nail with a used portion of the gel sponge, as it will redistribute the film causing dulling to the Top Gel. Use a clean saturated gel sponge for each finger. Tip: Wait with cleansing for about 1 minute after curing to let the nails cool down to get even more shine.

REMOVAL - BO. Soakable Gel Remover

Step 1: Have the client wash their hands with liquid soap and warm water. Towel dry hands and use BO. HygiSpray or BO. HygiGel.

Step 2: Remove the seal on each nail using a BO. Hygiene File 180 Grit. Saturate a Nail Foil with BO. Soakable Gel Remover and secure the foil firmly around the finger.

Step 3: Leave the Nail Foil on the finger for ten minutes. Using a twisting motion, pull the Nail Foil and product from the fingernail.

Step 4: If necessary, gently remove any excess Gelpolish using with a Cuticle Pusher. Be careful not to scrape away the surface layers of the natural nail plate.

Removal - BO. Gelbreaker

Step 1: For best results, first remove the top layer with a 180 grid file.

Step 2: Apply a generous layer of BO. Gelbreaker. Avoid contact with the skin.

Step 3: Wait 3 to 5 minutes. The Gelpolish will begin to break down and you will see fine cracks on the surface of the Gelpolish.

Step 4: Once the breaking stops, you can remove the remaining residue of the Gelpolish with a Cuticle Pusher or a woodstick.

Step 5: Wash hands thoroughly.

Available in store

Close
Login

Forgot your password?

  • All your orders and returns in one place
  • The ordering process is even faster
  • Your shopping cart stored, always and everywhere

compare0